FoundationDraw™ — The foundation of every project

The foundation of every project.

by Point Data Inc.

A closed perimeter drawing in FoundationDraw on iPhone

The idea

Everything starts with the perimeter.

Draw it once. Every tool builds on it.

Drawing
Loads
Cracks
Photos
Solution
Client 3D/AR

1Get your drawing

Pick your poison.

LiDAR scanScan the room with your phone.
Draw by handLine to axis + Ortho snap keep it square.
Import a pictureStart from a plan you already have.
  • Approve the perimeter. Skip the interior walls.
Guided outline: Line to axis straightens the walls
Line to axis
Get your perimeter right first. Don't worry about details yet.
Perimeter first

2Loads

Build the house in layers.

  • Stack it up from the grade to the roof.
  • Work each side: Front, Right, Rear, Left.
1Grade slope
2Footing depth
3Dirt height
4Basement
51st floor
62nd floor
7Roof
Loads: Front side view with grade slope
Front side
Loads: Right side with foundation, 1st floor and roof
Right side

3Cracks

Trace cracks right on the wall.

  • Foundation, wall and slab cracks.
  • Drawn on the wall’s full side view.
Foundation crack traced on the wall side view
Foundation
Wall crack traced on a brick wall
Wall
Slab crack on the floor plan
Slab

4Photos

Every photo lands where you took it.

  • Pinned on the drawing.
  • Tagged for you.
Photo markers pinned on the drawing
Pinned
Photo viewer with tags
Tagged

5Solution

Place piers by load or by spacing.

Backed by the Wall Profile Benchmark® report and the Topo Benchmark® report.

Note: load figures are estimates. Always consult a licensed engineer.

Pier group with spacing controls
Piers
Wall Profile Benchmark report page
Wall Profile
Topo heat map on the drawing
Topo

6Show the client

One link. They see it in 3D and AR.

  • Walls, floor topo and cracks.
  • Plus a Full house AR view.
Full house view in 3D
Full house AR
Client link: walls in 3D with AR buttons
Walls + AR
Client link: floor topo under the walls
Floor topo
Client link: cracks shown in 3D
Cracks

The example house

Two walls lean. The floor agrees.

  • Wall Profile and 3D show the lean.
  • The topo shows the same problem.
  • Marked cracks show in 3D too.
Wall Profile heat map of the front wall
Wall Profile
Walls in 3D with a marked crack on the front wall Crack
Walls 3D
Floor topo in 3D with a marked slab crack Crack
Topo 3D

Available today.

Start with the perimeter. Stack the layers. Show the client.

Get notified

FoundationScan®by Point Data Inc.